Format: PDF / Kindle / ePub
Size: 13.25 MB
Downloadable formats: PDF
Publisher: E.F.Kalmus (1933)
Dry the brass with a dry cloth or allow it to air dry. Make sure there are no streaks or marks on the brass before continuing, as they will remain there after you are done. Add a layer of polyurethane sealer, varnish, or polymer-based car wax. Follow the manufacturer's instructions for whichever product you use , e.g. http://ballard73.com/?freebooks/symphony-in-b-flat-major-for-concert-band-trombone-ii. They were used in choral music in the Reniassece and early Baroque because their focused flexible sound was often compared to human verses ref.: http://ballard73.com/?freebooks/koenigskinder-trombone-1-2-and-3-parts-a-7968. While originally seen as a gimmick, these plastic models have found increasing popularity of the last decade and are now viewed as practice tools that make for more convenient travel as well as a cheaper option for beginning players not looking to invest so much in a trombone right away http://ballard73.com/?freebooks/hannah-montana-for-trombone-hal-leonard-instrumental-play-along. It is in very good condition and has a nice patina giving it a classic vintage look. The slide has minimal wear and works well. Notably, the early 30s 78H slide has shorter cork barrels then previous or future models. Not sure why Conn changed the slide design, but this is one of those , cited: http://1-million-link.com/lib/goetterdaemmerung-wwv-86-d-act-iii-gesang-der-reintochter-concert-arrangement-trombone-1-part. Sackbuts produced a dynamically versatile vocal sound with a two-octave range, making them popular for Renaissance and Baroque chamber music. The earliest sackbut was in the tenor range, but could reach some alto and bass notes. By the 1500s, there were four common kinds of sackbuts: A tenor, alto, bass, and contrabass. With a variety of crooks, the pitch of these instruments could be lowered even further , cited: http://www.asiatoyz.com/?books/marion-delorme-marche-funebre-act-iv-trombone-2-part-qty-7-a-5256. SOLD $1200 One of the most mysterious makers in the world, Inderbinen creates unique trombones that not only look special but play that way too. This one is his medium bore, Quart model which has a .525" slide and a Hagmann F attachment. Beautiful raw brass brushed finish with dark patina inside the bell. SOLD Here's the real deal, the Mt Vernon 50B bass trombone , e.g. http://ballard73.com/?freebooks/famous-fillmore-marches-1-st-and-2-nd-trombones.
as with polishing/refinishing anything, the trick is to proceed from the coarse/aggressive to the fine. first, as you have pointed out, if the piece is 'coated', that has to be removed. this coating is properly referred to as lacquer, ('cause that's what it is.) unfortunately, in my experience, the only thing that will reliably remove it is stripper. and not the 'citrus' 'environmentally friendly', stripper either. nope, the nasty stuff that burns when you splash it on your skin. the kind with methylene chloride. foul stuff, but, if you want to get the job done... most of the rest of your advice is pretty good. however, i notice in your picture that you didn't polish the dog covers, and the finials that hold them on. they're supposed to shine too, and they ain't easy. the material you're dealing with here isn't metal tarnish, it's creosote. it comes out of the wood (it's not soot, it's a hydrocarbon chemical. it's also produced industrially and used to waterproof utility poles.) more creosote comes out of softwoods than hardwoods, so if the previous owners burned a lot of pine, it's going to be worse. here's where the aggressive part comes in. i've had the most success with 3m pads and a cleanser called barkeepers friend. this will clean them, but you won't have a high shine. you bring this back with progressively finer steel wool and polish. the best commercially available product for a mirror finish, imho, is maas metal polish. it seems expensive at first, but a little does go a long way.
I skipped the dog covers ( at the little finials at the end of them ) partly because they are difficult, partly because they are so close to the fire that they do not stay polished for long http://borisbeja.eu/lib/symphony-no-3-op-227-trombone-2-part-qty-2-a-7469. Use a cloth to apply brass polish to the brass. For hard-to-reach areas, such as cracks, use a toothbrush to apply the brass polish. Follow the brass polish manufacturer's instructions. Dampen a cloth with water and dish detergent and clean the brass. Dampen another cloth with water and wipe off any residue. Dry the brass with a dry cloth or allow it to air dry. Make sure there are no streaks or marks on the brass before continuing, as they will remain there after you are done , source: http://1-million-link.com/lib/old-devil-moon-6-part-trombone-choir-arrangement-parts-written-in-dual-notation.
based on 1471 customer reviews